chanduv23
02-26 02:52 PM
Hi
According to my experience it doesnt make a difference whom you contact. I would suggest contact all (both senators of your state and local congressperson). It has no negative bearing on your case. I would also suggest
that you contact the ombudsman. You never know whats going to click in the end.
Best
cinqsit
Yes, one has to do everything. It helps solve the issue from all directions. It helps educate law makers about issues, also allows Ombudsman's office to understand common issues.
On another note, if anyone is having issues with their petitions and need help, you can also contact IV, send a message or post it on the forum.
Post issues on various forums on the internet too helps
According to my experience it doesnt make a difference whom you contact. I would suggest contact all (both senators of your state and local congressperson). It has no negative bearing on your case. I would also suggest
that you contact the ombudsman. You never know whats going to click in the end.
Best
cinqsit
Yes, one has to do everything. It helps solve the issue from all directions. It helps educate law makers about issues, also allows Ombudsman's office to understand common issues.
On another note, if anyone is having issues with their petitions and need help, you can also contact IV, send a message or post it on the forum.
Post issues on various forums on the internet too helps
wallpaper pharrell tattoos
USDream2Dust
10-15 06:53 PM
I have had situations where CIS has issued more than one RFE, but only about twice in 12 years of immigration practice.
I would relax now and be happy about not getting another RFE in short time.
I would relax now and be happy about not getting another RFE in short time.
ajju
03-01 12:04 PM
Hi All,
I used to commute across the border from Canada to work(on h1b) between 2004 and 2006. My passport was stamped just the first time and never after that.
I've heard of this behavior at PoE especially for Mexico and Canada.. I think we need to remind and ask for stamping.. even if they say its okay...
I landed in Canada in 2004 and came back in 2 weeks... My original I-94 had expired.. but I 'd new one on my new H1 approval.. So they gave me a new I-94.. My wife's I-94 was valid.. so she didn't get a new I-94... But her passport was stamped... May be because it was first trip...
I agree with gokhale35 to provide evidence from CC... but if its older than a year.. most CC bills won't be available... lease copy may be possible... I think affidavit plus letter from employer may suffice.. But a lawyer would be your best bet anyways...
Good luck... should be resolved soon.. and you'll get GC soon...
Where's mine :-(
I used to commute across the border from Canada to work(on h1b) between 2004 and 2006. My passport was stamped just the first time and never after that.
I've heard of this behavior at PoE especially for Mexico and Canada.. I think we need to remind and ask for stamping.. even if they say its okay...
I landed in Canada in 2004 and came back in 2 weeks... My original I-94 had expired.. but I 'd new one on my new H1 approval.. So they gave me a new I-94.. My wife's I-94 was valid.. so she didn't get a new I-94... But her passport was stamped... May be because it was first trip...
I agree with gokhale35 to provide evidence from CC... but if its older than a year.. most CC bills won't be available... lease copy may be possible... I think affidavit plus letter from employer may suffice.. But a lawyer would be your best bet anyways...
Good luck... should be resolved soon.. and you'll get GC soon...
Where's mine :-(
2011 his tattoos, Pharrell
mk26
04-26 02:18 PM
Why did we all come to USA?
Did any of you knew the Green card problems when you came?
Did you know the problems when you applied for greencard many years ago?
When was the first time you found out there was a ling wait period and so many problems?
Can you please clear your point for asking these here ?
Did any of you knew the Green card problems when you came?
Did you know the problems when you applied for greencard many years ago?
When was the first time you found out there was a ling wait period and so many problems?
Can you please clear your point for asking these here ?
more...
godbless
07-20 06:03 PM
Do we need to send the original i 140 or just copy of I 140 is fine ? I mean do we need to send original I 140 to USCIS at any point in the 485 filling?
saji007
05-02 04:10 PM
I changed jobs after 5.5 years on my H1-B. When the new company filed for H1-transfer i got approval for 3 years based on the I-140 from the previous employer. In this case there was no need to apply for extension, while transferring the visa, I got 3 years. Send I-140 and Perm copies along with the H1-Transfer
more...
pappu
01-30 02:47 PM
Please update your profiles and help us make this tracker popular. Here are some tutorials to help you get started
Getting Started: http://www.youtube.com/watch?v=L9mE1L5HWm8&fmt=18
Basics: http://www.youtube.com/watch?v=PFDccTmrMfY&fmt=18
Finding and Filtering: http://www.youtube.com/watch?v=vf_1yqAGZYs&fmt=18
FAQs:http://immigrationvoice.org/wiki/index.php/IV_TRACKER
We urge everyone to input correct profile details so that we can help each other. Please also politely nudge each other to enter correct profile details when you see an incorrect data. We need the analysis as charts and graphs of this data for a presentation we will do to lawmakers for recapture bill this year and any possible admin fixes.
Correct data will also help everyone track cases better on IV tracker.
Let us all help in this effort.
Getting Started: http://www.youtube.com/watch?v=L9mE1L5HWm8&fmt=18
Basics: http://www.youtube.com/watch?v=PFDccTmrMfY&fmt=18
Finding and Filtering: http://www.youtube.com/watch?v=vf_1yqAGZYs&fmt=18
FAQs:http://immigrationvoice.org/wiki/index.php/IV_TRACKER
We urge everyone to input correct profile details so that we can help each other. Please also politely nudge each other to enter correct profile details when you see an incorrect data. We need the analysis as charts and graphs of this data for a presentation we will do to lawmakers for recapture bill this year and any possible admin fixes.
Correct data will also help everyone track cases better on IV tracker.
Let us all help in this effort.
2010 wallpaper Pharrell Williams
Vsach
05-16 09:00 AM
Its simple, do it online!! Save money....we did it 5 yrs ago.
more...
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
hair Pharrell#39;s pictures: pharrell
ras
07-15 12:46 PM
I have used AC21 to change jobs
I have a closing statement from my previous employer mentioning the exercisable options.
Here it goes:
Exercisable Options
Price $30
grant date 1/10/2007
Shares exercisable 400
total price =12000
Last date to exercise
7/20/2008
However the market share value for the company now is 26.00
now my question is if I were to exercise before the last date will I be getting the total amount of $12000 or 26 x 400 = $10400 or the difference between the share values which is infact negative or nothing?
I find it difficult understand this financial terms. I dont understand clearly the term 'Exercisable options' Is there a hidden treasure am going to get?????
I have a closing statement from my previous employer mentioning the exercisable options.
Here it goes:
Exercisable Options
Price $30
grant date 1/10/2007
Shares exercisable 400
total price =12000
Last date to exercise
7/20/2008
However the market share value for the company now is 26.00
now my question is if I were to exercise before the last date will I be getting the total amount of $12000 or 26 x 400 = $10400 or the difference between the share values which is infact negative or nothing?
I find it difficult understand this financial terms. I dont understand clearly the term 'Exercisable options' Is there a hidden treasure am going to get?????
more...
Ramba
08-07 08:31 PM
Thanks. Yes, I am an Indian citizen.
Do I need NO status even if I were on the company's pay roll and getting paid in US dollars while working outside US?
---Once you leave US, you are not in any status, even if you have a visa stamp or H1 approval. If you are a H1B beneficiary, an US employer cannot put you in US payroll, if you are not physically present in US, working at the worklocation specified in LCA. The only exeption is if you go for a short vacation while working in US in H1B. You should be a US citizen or LPR, to be in US payroll without physically present in US.
In spite of their gracious offer to allow me to work remote, I do foresee a need where they would require my presence (a week or so at a time). Will B1 cover a visit to the company that I am getting paid for? Or, is there a type of B visa that allows me to visit the company and actually work for it?
---There is no such B visa that gives work authorization in US. The best advise is start a bussiness in India and do the service to your US client and incoive them and get the money in US doller. Wehn you are ready to come to US, request them to sponser H1; any way H1B quota is never going to fill.
If you/any others help me point to someone who can help me with IRS implications, that would be great. I don't expect this to be simple, thus my effort to do it the right way. The last thing I would want after spending 10 years here is to break the law.
My company and I will consult before signing on the dotted line. This is just ground work and thanks for all who take the time to answer these questions.
---
Do I need NO status even if I were on the company's pay roll and getting paid in US dollars while working outside US?
---Once you leave US, you are not in any status, even if you have a visa stamp or H1 approval. If you are a H1B beneficiary, an US employer cannot put you in US payroll, if you are not physically present in US, working at the worklocation specified in LCA. The only exeption is if you go for a short vacation while working in US in H1B. You should be a US citizen or LPR, to be in US payroll without physically present in US.
In spite of their gracious offer to allow me to work remote, I do foresee a need where they would require my presence (a week or so at a time). Will B1 cover a visit to the company that I am getting paid for? Or, is there a type of B visa that allows me to visit the company and actually work for it?
---There is no such B visa that gives work authorization in US. The best advise is start a bussiness in India and do the service to your US client and incoive them and get the money in US doller. Wehn you are ready to come to US, request them to sponser H1; any way H1B quota is never going to fill.
If you/any others help me point to someone who can help me with IRS implications, that would be great. I don't expect this to be simple, thus my effort to do it the right way. The last thing I would want after spending 10 years here is to break the law.
My company and I will consult before signing on the dotted line. This is just ground work and thanks for all who take the time to answer these questions.
---
hot dressing like Pharrell.
steffit
June 16th, 2006, 10:28 AM
Hi Antonio,
Great stuff!!!
I love no. 2, 3 and 4.
2 for the dynamic composition, 3 just cracked me up because the percussion instruments are so domineering and 4 seems pure concentration. 2 and 4 could maybe be cropped slightly, but that's very minor.
Cheers,
Stefanie
Great stuff!!!
I love no. 2, 3 and 4.
2 for the dynamic composition, 3 just cracked me up because the percussion instruments are so domineering and 4 seems pure concentration. 2 and 4 could maybe be cropped slightly, but that's very minor.
Cheers,
Stefanie
more...
house Pharrell has a fixed gear
orion
11-07 05:01 PM
Yes i had also applied OCI for my child about 6 months back and was denied since we parents hold indian citizenship. Does anybody know that registering every 6 months is a must ? Some of my friends have permanentely gone back to India i am not sure what they are doing though since there kids hold US Citizenship. Any infomation on this will be helpful.
- A child under age 16 (with any visa, including PIO) don't need to register with FRRO. But many Indian immigration officials conveniently forget this and harass you. So you better take a print out from official Indian Government website.
- PIO card holder needs to register with FRRO when the stay exceeds 6 months for the first time and that registration is valid until PIO expires. PIO is valid for 15 years, so you will register once in 15 years at the most.
Google for references. If you don't find it, I will look up and post it.
- A child under age 16 (with any visa, including PIO) don't need to register with FRRO. But many Indian immigration officials conveniently forget this and harass you. So you better take a print out from official Indian Government website.
- PIO card holder needs to register with FRRO when the stay exceeds 6 months for the first time and that registration is valid until PIO expires. PIO is valid for 15 years, so you will register once in 15 years at the most.
Google for references. If you don't find it, I will look up and post it.
tattoo Tattoo Pharrell Before And
prem_goel
07-06 12:48 AM
Please update your profile so that I and others can help you effectively.
Can you share the link where you read that adding F1 to I-485 application is allowed? I am pretty sure that being on F-1 visa the intent to immigrate is not recognized. (Think about it, we would have all the students applying for Green cards then:)
You need to share your priority date as well as when you applied for 485. Assuming your 485 has been pre-adjudicated like a lot of people, I would think an RFE would only be triggered if you have any service records update (like address change on 485, I-140 withdrawl etc). Else they'll just wait for your dates to get current and once it is, they'll simply allot you a visa number.
Secondly, please recognize that once you lose your H-1b status, you will not be able to add your wife to 485 through AOS, but she will have to go through Consular Processing (UNLESS YOUR WIFE OBTAINS HER OWN H-1B or L-1).
Can you share the link where you read that adding F1 to I-485 application is allowed? I am pretty sure that being on F-1 visa the intent to immigrate is not recognized. (Think about it, we would have all the students applying for Green cards then:)
You need to share your priority date as well as when you applied for 485. Assuming your 485 has been pre-adjudicated like a lot of people, I would think an RFE would only be triggered if you have any service records update (like address change on 485, I-140 withdrawl etc). Else they'll just wait for your dates to get current and once it is, they'll simply allot you a visa number.
Secondly, please recognize that once you lose your H-1b status, you will not be able to add your wife to 485 through AOS, but she will have to go through Consular Processing (UNLESS YOUR WIFE OBTAINS HER OWN H-1B or L-1).
more...
pictures pharrell tattoos
uumapathi
08-19 08:59 AM
My wife just got her EAD yesteday and it was for 2 years. I am expecting mine today and I hope it will be for 2 years as well and interestingly, my I140 is still pending.
dresses Game Tattoo Pharrell
jetr
08-27 12:06 PM
My 140 is Approved from Company A.I haven't filed my 485 yet.
My H1 6 Yr period ends in Mar 2009.I am planning to move to company B and request a 3 yr extn based on my approved 140(with Company A).
My qn is what if company A cancels my 140?
If I get my 3yr H1 extn approved (before 140 cancellation) will my status be valid?
Thanks for your help.
My H1 6 Yr period ends in Mar 2009.I am planning to move to company B and request a 3 yr extn based on my approved 140(with Company A).
My qn is what if company A cancels my 140?
If I get my 3yr H1 extn approved (before 140 cancellation) will my status be valid?
Thanks for your help.
more...
makeup of his tattoos removed.
krishnam70
02-22 11:45 PM
hi,
My I140 was approved in 2006 and based on that i got a 3 year extension on my H1 visa. I filed for I485 in July 2007 and have an approved EAD and AP extension too.
Around 3 months back i joined a company as a permanent employee using my EAD.
I did not inform my employer about the new employment because he had already cancelled my Health insurance etc, after 3 months vacation in india and another 2 months without a project.So i wasn't on his payroll since April '08.
I recently got an update on my H1 application with the following message.
Current Status: Case reopened or reconsidered based on USCIS determination, and the case is now pending.
I am assuming it has to do with cancellation of my H1.
I am not sure if my I140 is cancelled or not.Is there a way i could check this?
I also saw a soft LUD on our I485's on Feb 10th. Does the cancellation of my H1 have any effect on the I485 applications?
Its been an endless wait for this GC since 10 years of my stay in this country.Now iam worried whether the H1 cancellation would jeopardise everything.
Since i was without project for a long time, i had to join the new job using EAD.
Please let me know your opinions.
First speak to your employer if they
a) sent a cancellation for H1B
b) If they received any notice from USCIS/request for information or if they have any information about this
c) Though it is not mandatory to file AC21 you can still file AC21 based on a consultation with an attorney.
Most important thing is to know if your employer has informed USCIS about any updates or if the company has received any notification from them
- good luck
kris
My I140 was approved in 2006 and based on that i got a 3 year extension on my H1 visa. I filed for I485 in July 2007 and have an approved EAD and AP extension too.
Around 3 months back i joined a company as a permanent employee using my EAD.
I did not inform my employer about the new employment because he had already cancelled my Health insurance etc, after 3 months vacation in india and another 2 months without a project.So i wasn't on his payroll since April '08.
I recently got an update on my H1 application with the following message.
Current Status: Case reopened or reconsidered based on USCIS determination, and the case is now pending.
I am assuming it has to do with cancellation of my H1.
I am not sure if my I140 is cancelled or not.Is there a way i could check this?
I also saw a soft LUD on our I485's on Feb 10th. Does the cancellation of my H1 have any effect on the I485 applications?
Its been an endless wait for this GC since 10 years of my stay in this country.Now iam worried whether the H1 cancellation would jeopardise everything.
Since i was without project for a long time, i had to join the new job using EAD.
Please let me know your opinions.
First speak to your employer if they
a) sent a cancellation for H1B
b) If they received any notice from USCIS/request for information or if they have any information about this
c) Though it is not mandatory to file AC21 you can still file AC21 based on a consultation with an attorney.
Most important thing is to know if your employer has informed USCIS about any updates or if the company has received any notification from them
- good luck
kris
girlfriend Happy Birthday Pharrell
sandy_77
06-20 11:51 AM
I would like to appeal to all the people who want to travel outside the country and would need a new visa stamp to come back to US....please...please...please do not take this risk unless it is a family emergency (a life and death situation rather than a brother,sister getting married). Per the new rules all of us have to pass through many checks (such as PIMS, NAME CHECK, SECURITY CLEARANCE, ETC.). Contrary to popular belief PIMS is the simplest of all. You will possibly get a PIMS clearance within a month (usually 5 days). However, if you get stuck because of other checks, only God can help you. People (more than a couple of thousand at any given time during these days) are stuck at the consulates in India for two months or more (these days waiting time exceeds 4 months in normal cases and I am one of them). Some guys have been given visas after 1.5 years. Also, contrary to what most lawyers would have you believe that only those people get stuck who have done something wrong, I can assure you that there are very few cases (possibly less than a 5% of the total) who have been outright rejected even after significant delays for security clearances. These lawyers have just surrendered before the DOS/DHS...possibly avoiding burning bridges with the government rather than protecting human rights and civil liberties. God forbid if you get stuck for reasons other than PIMS, anything you can ever know from consulate/DOS after that is that your case is pending in "additional administrative processing" for security clearance. No more no less and you probably have no right to demand transparency. Not even your local congressman/senator can save you then from the harassment that the DOS thinks you deserve for being a third world citizen.
Sorry for being so brazen but I am tired of all these travel related questions. Somehow I think some of like to challenge the consulate/DOS OR our luck (like I did...but I didn't even know that there is a best like AAP out there waiting for me...of course ignorance is not an excuse either).
Sorry for being so brazen but I am tired of all these travel related questions. Somehow I think some of like to challenge the consulate/DOS OR our luck (like I did...but I didn't even know that there is a best like AAP out there waiting for me...of course ignorance is not an excuse either).
hairstyles tattoos middot; Pharrell Williams
pointlesswait
09-17 11:49 AM
if you can find such a company...nothing like it!
but how many have such flexible policies..;-)
pointlesswait,
I respectfully disagree with your comment on no full time MBA on H-1. I infact know this first hand as one of my friends finished his full time MBA on H-1. His company was nice enough to keep him on the payroll but gave him 2 yrs of leave of absence. He is now back working for the same company. The only down side to his approach was that he ended up losing 2 yrs of his H-1 but his goal was to come back and work for the same company, so he didn't care.
but how many have such flexible policies..;-)
pointlesswait,
I respectfully disagree with your comment on no full time MBA on H-1. I infact know this first hand as one of my friends finished his full time MBA on H-1. His company was nice enough to keep him on the payroll but gave him 2 yrs of leave of absence. He is now back working for the same company. The only down side to his approach was that he ended up losing 2 yrs of his H-1 but his goal was to come back and work for the same company, so he didn't care.
venkatosizolon
03-28 11:54 PM
If you are on H1 and employer is not paying weather or not you are on bench, you must report that to DOL. There is a form w-4 (I don't exactly remember the form).
Employee must be paid ALL THE TIME on H1. Period.
That's the law.
Problem for you is, technically you will be out of status if you are not paid.
What if I only complain about recent unpaid period when I was in even in project. They dint pay any thing on March 15th and dont want to pay on March 31st. They only want to pay in April. Whats your suggestion?
Thx
Employee must be paid ALL THE TIME on H1. Period.
That's the law.
Problem for you is, technically you will be out of status if you are not paid.
What if I only complain about recent unpaid period when I was in even in project. They dint pay any thing on March 15th and dont want to pay on March 31st. They only want to pay in April. Whats your suggestion?
Thx
freeskier89
02-08 06:22 PM
Voters: 89
freeskier89
Suspicious. :P
Anyways, yay. haha!! This poll was rigged from the start! :P Just kidding of course. Congrats everyone
freeskier89
Suspicious. :P
Anyways, yay. haha!! This poll was rigged from the start! :P Just kidding of course. Congrats everyone
ليست هناك تعليقات:
إرسال تعليق